微生物燃料电池的专利技术综述

检索了微生物燃料电池在中国的发明专利文献,综述了微生物燃料电池在废水处理中的应用及与现有技术中其他水处理技术耦合的专利进展,并对其实际应用的前景进行了展望。     

喹啉和吡啶共存条件下的MFC产电特性研究

喹啉和吡啶往往共存于实际废水中,本文通过构双极室MFC,以铁氰化钾为电子受体,对喹啉和吡啶在MFC中的降解以及产电性进行研究.结果表明,MFC的最大输出电压随着葡萄糖浓度的降低而降低,当喹啉和吡啶初始浓度均为500mg·L-1,葡萄糖浓度分别为1000、500、100mg·L-1时,最高输出电压逐渐降低,分别为606、537、354mV;最大体积功率密度为18.4、14.4和6.3W.m-3.当以等浓度500mg·L-1的喹啉和吡啶作混合燃料时,MFC的内阻超过1250Ω,最大体积功率密度为2.9W.m-3.周期结束时,COD的去除率达79%以上,喹啉和吡啶均可以完全去除,喹啉的降解速率明显高于吡啶.MFC可以利用喹啉和吡啶作为混合燃料,这为含喹啉和吡啶共存类实际废水的MFC处理提供了理论依据.     

微生物燃料电池中产电微生物电子传递研究进展

微生物燃料电池集产电和污水净化为一体,作为一种新型的能源回收技术得到人们的广泛关注。从微生物燃料电池工作原理来看,电子能否顺利地传递到阳极表面对于电流的产生起着关键作用。因此,本文重点阐述了电子在产电微生物体内产生的途径、电子从微生物体内向阳极传递的不同方式以及阳极材料对产电微生物附着和电子传递的影响。从生物化学、电化学和材料学上对产电微生物体内的电子到阳极整个过程进行全面的综述。明确电子传递的关键环节,为新型高效阳极材料的开发提供思路。     

利用玉米浸泡液产电的微生物燃料电池研究

以玉米淀粉生产过程中的浸泡液（玉米浸泡液）作为接种液和基质,利用“三合一”膜电极的单室空气阴极微生物燃料电池进行试验,采用在线监测电压和废水分析方法对产电功率和化学需氧量（COD）、氨氮进行测定,探讨高COD、高氨氮有机废水产电及废水处理的可行性.结果表明,经过94 d（1个周期）的连续运行（固定外电阻为1 000 Ω）,17 d时输出电压达到最大（525.0 mV）,稳定期最大输出功率可达169.6 mW/m²,此时电池相应的电流密度为440.2 mA/m²,内阻约为350 Ω,开路电压619.5 mV;但燃料电池电子利用效率较低（库仑效率为1.6%）;1个周期结束时浸泡液的COD去除率达到51.6%,氨氮去除率25.8%.本试验利用玉米浸泡液成功获得电能,同时对浸泡液有效地进行了处理,为其资源化利用提供新途径.     

Determination of emergency assembly point for industrial accidents with AHP analysis

Major industrial accidents, which are a type of technological disaster, are very important due to the security risks and financial damages that threaten the environment and human health in today's industrialization. In this study, it was aimed to propose an approach that will guide the decision makers to choose the emergency assembly point that should be in the distance or shelter where the employees will be not affected by the negative consequences of emergencies within the scope of the obligation of industrial establishments preparing an internal emergency plan for major industrial accidents. For this purpose, in the first stage, modelling studies were carried out with ALOHA (Areal Locations of Hazardous Atmospheres) Software over possible accident scenarios in an industrial establishment containing different types and amounts of hazardous chemicals. As a result of modelling studies, possible toxic emissions, fire and explosion effect distances and threat zones for the industrial establishment were obtained. In the second stage, the weights of the main and sub-selection criteria to be used in determining the assembly point were calculated. This stage was carried out based on the comparison data obtained as a result of the questionnaire applied to professionals with the help of AHP (Analytic Hierarchy Process) method, which is one of the multi-criteria decision making methods. In the last stage, three candidate points were selected considering the physical effect areas determined in the first stage in the boundaries of the establishment, where the employees were evaluated to be affected the minimum from the negative consequences of industrial accidents. These candidate points were evaluated again with the AHP method on the basis of the sub-criteria whose relative weights were determined in the second stage and a selection was made. As a result, an approach that provides the solution of our problem was obtained.     

Prevalence of Musculoskeletal Disorders at Workplaces in the People’s Republic of China

This paper presents 2 musculoskeletal disorders questionnaire surveys in 10 different Chinese occupational groups. Data collected from 1,603 workers using a modified Nordic musculoskeletal disorders symptom questionnaire showed that the 12-month prevalence of musculoskeletal disorders, particularly in the low back and shoulder-neck regions, was high at many Chinese workplaces. Significant differences existed between occupational groups. Assembly workers usually had higher neck-shoulder complaints compared to workers in most other occupations. However, the nature of assembly seemed also to influence the prevalence rate. Workers at a cassette recorder and a TV set assembly plant appeared to have more neck complaints compared with a group of thermos flask assemblers.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Ergonomic analysis of working postures using OWAS in semi-trailer assembly,applying an individual sampling strategy

In semi-trailer assembly, workers are exposed to several physical risk factors. Awkward working postures have not yet been investigated in semi-trailer assembly, although they are known to be a major risk factor for musculoskeletal disorders. We therefore conducted a comprehensive ergonomic analysis of working postures using the Ovako working posture analysing system (OWAS), with an individual sampling strategy. The postural load in semi-trailer assembly was assessed on the basis of 20,601 observations of 63 workers executing a representative set of nine work tasks. According to the OWAS, the postural load of various working postures and body part positions may have a harmful effect on the musculoskeletal system. We therefore give examples of corrective measures that could improve awkward working postures. Applying an individual sampling strategy was revealed to have advantages over a collective strategy, so this is recommended for future ergonomic analyses.     

Applying CES to assembly and comparing carbon footprints

A Carbon Emission Signature (CES) and a Carbon Emission Label have been proposed for manufactured products in previous CIRP (Collège International pour la Recherche en Productique) annals. This paper considers two things: (1) an example of a CES calculation for assembly with CO₂ emissions and (2) the need for a transparent method of calculation. In comparing carbon footprint calculations for 17 websites, the results are found to vary more than threefold depending upon the site used and even more between different methods illustrating the need for standardisation in emission calculations for carbon accounting.     

Assembly operator training and process planning via virtual systems

In this paper, we present an integrated intuitive system for assembly operators training and assembly process planning by combining virtual reality with motion-tracking technologies. The developed conceptual prototype for assembly planning and training enables individuals to interact with a virtual environment in real time. It extends the new technologies of motion tracking and integrates them with virtual environment technologies to create real-time virtual work cell simulations in which assembly operators may be immersed with hands-on experiences. In addition to operators training, the experimental results to date are presented to demonstrate the potential contributions of human skills in achieving effective assembly planning including disassembly operations. It is expected that this approach will lead to environment-friendly and sustainable operations by conserving energy and cost that are first tested in a human-emerged virtual system.